Increasing energy costs and diminishing coal, oil and gas resources are leading more people toward renewable energy resources. Not only do we want to be reliant on energy companies who are increasing energy costs, but we also need to find clean and sustainable energy sources. haltonmachining
In the past there have been significant costs involved with designing and installing a solar power system in your home. Unfortunately this, and a combination of other factors, has stalled the uptake of renewable energy resources in residential areas. However, as technology advances and homeowners become aware of build it yourself solar panels, there is still hope for an increasing uptake of renewable energy generation within the home.
Fortunately for those of us how aren’t exactly technologically knowledgeable, these panels can be purchased as a kit. These build it yourself solar panel kits are still much more affordable than pre-constructed commercial panels. But for the thrifty and extra determined people among us, it is also completely possible to construct your very own panels from scratch. wrdesignprint
No matter which method you decide to undertake with your build it yourself solar panels it can be very useful to learn a bit more about the main components that make up the solar panel and how these components work together to generate solar energy. There are several key components that make up a panel.
The central and perhaps most important component of the solar panel is the solar cells. A build it yourself solar panel is constructed with a number of photovoltaic (PV) cells, also commonly known as solar cells. The cells are made up from two different types of thin silicon layers. It is these silicon layers that capture and convert the suns rays into solar energy.
Along with the solar cells, your build it yourself solar panel will also be constructed with a frame, cement and a layer of glass to contain and protect the photovoltaic cells. The cement in the panel acts as a cooling agent to stop the solar cells from becoming overheated. For more info please visit these sites :- https://www.dkproducts.biz
At first it may make sense to install your build it yourself solar panel in a position where it will be exposed to the most amount of sun, however, if the panel isn’t thoughtfully positioned, the solar cells will be at risk of overheating and being damaged. To avoid this it’s highly recommended that the panels are installed with a gap between the mounting surface (i.e. the roof) and the panel itself. This will allow air to continually circulate the panel and thus keep it cooler.
When your build it yourself solar panels is successfully constructed and installed, the suns rays will be captured through the silicon cells and converted into an electrical current. This occurs as the sun warms up the solar cells generating movement of the electrons in the silicon, the movement of the electrons is what generates the energy. This raw energy cannot be fed directly into your home’s power grid just yet. It needs to be sent through an inverter, which will then convert the energy into an alternating current, which is the type of current your household’s appliances run on.
With this basic understanding how build it yourself solar panels are able to harness solar power and convert it into an electrical current to power your household it is easier to see how your home can benefit. By constructing and installing the panels in your own home you will not only be able to save money on commercially built and installed solar panels, but you will also be doing your bit to help encourage others to take up solar power and reduce their reliance on polluting conventional energy sources.